Packaged Steam Generators
The Circulatic® Line
Low Cost, process and heating steam for Industrial and Commercial Application

Recirculating Water Tube Units to: 600 BPH and 530 psig 20,700 lbs. per hour

Rapid start up - from cold start to full load in five minutes
Easy access to burners - end mounted burner is simple to maintain.
High quality steam - guaranteed 99% + dry steam.
Low cost coil replacement - multiple coil design permits damaged coil replacement.
Minimal soot problems - separate combustion chamber prevents coating coils with
partially burned fuels.
Minimum prepurge energy loss - smaller size unit allows proper prepurge in seconds.
Low fuel requirements - air preheating and refractory lined chamber for complete
combustion.
Simplified fuel switching - only have to turn selector, no burner changes required.
Quick response to load changes - cycle time of less than one minute.
Minimum off-on cycling - turndown ratios up to 10-1 for handling wide range of loads.
Complete line - nine sizes to permit proper selection for any application.
Low installation costs - packaged, compact units require only 60% of floor space
needed for firetube boilers
Long life with minimum maintenance - coil design pressure of 1000 psig result
in thicker coil walls for longer life.
Easy installation skid mounted assembly including control console.
Optimum efficiency at any load - full modulation of water, air, fuel & output.
Maximum safety - steam drum located outside of firing zone.